Hand held fiber laser welder is mainly used in the welding process of the advertising industry. It connects the laser head and the laser welding machine through an optical fiber, realizing the long-distance transmission of the laser. Workers can realize product spot welding, straight seam welding, overlapping welding, circular welding, and welding of any trajectory when operating the equipment, and can also add welding wire. So How to install and operate the handheld fiber laser welding machine?
Preparations before starting up
The first step is the preparation stage. In general, we will do some inspections first to ensure that there is no problem with the machine. Only when the inspection work is done well can the later stage is correct.
- Check whether the switch of the fiber laser welding machine is intact and whether the water circulation is normal.
- Check whether the gas connection of the equipment in the machine is normal.
- Wear specific protective glasses when operating. Because the light beam during operation will cause certain damage to human eyes, it is very important to wear glasses.
Set welding parameters
According to the material, thickness, and other characteristics of the parts to be welded, set the appropriate welding parameters. Usually, the operator needs to set parameters such as laser power, laser beam diameter, and welding speed. Different welding parameters can affect welding quality and efficiency.
position the part
Place the parts to be welded on the welding platform, and use tools such as clamps or magnetic chucks to fix the parts. Doing so ensures that the welding position is accurate.
start welding
Turn on the laser switch and aim the laser beam at the welding position. Pay attention to avoid the laser beam directly irradiating the human body or other objects, so as not to cause injury. Then, press the welding switch to start welding. During the welding process, it is necessary to keep the machine stable and the welding speed uniform. After finishing welding, turn off the laser switch and wait for the device to cool down.
Conclusion
Hand held fiber laser welder machine is a kind of welding equipment with high precision and high efficiency. It can weld parts on site. The correct operation method is the key to ensuring welding quality and safety. When using a hand held fiber laser welder, it is necessary to complete the preparation work, set the welding parameters, position the parts, start welding, and other steps. At the same time, it is necessary to avoid problems such as excessive use of equipment and direct exposure of laser beams to the human body.
DXTECH has a complete range of products with complete specifications. These products are sold all over the world. At the same time, we can customize and process various products according to customer requirements. Welcome to contact us.