DX-TP10S Twisted Axis CNC Press Brake Machine

Sheet Metal Bending Samples

Bending machines can bend a variety of metal materials such as stainless steel, iron, copper, aluminum, titanium and carbon steel. As small as non-ferrous metals, ferrous metal sheets, automobiles and ships, electrical appliances, decoration, kitchen utensils, cabinets, elevator cabinet doors, cutting and bending processing; as large as the aerospace field, CNC shearing machines and CNC bending machines are playing an increasingly important role.

We provide free proofing, welcome to consult.

Inquire now

1.The main features of the machine

1.1 The model is advanced and beautiful. The two oil cylinders are fixed on the left and right wall panels. The force state of the whole machine is reasonable and the rigidity is sufficient.

1.2 Good synchronous performance, strong anti-eccentric load capability, and easy debugging.

1.3 It has the best parameter ratio and core material configuration, stable performance, more convenient operation, and can bend workpieces of various complex shapes.

1.4 Compared with the traditional bending machine, the hydraulic bending machine has better bending accuracy and efficiency and can increase the bending time by 30%.

2.The main components and structure of the machine

2.1. TP10S CNC system：

2.1.1 The TP10S controller system includes 2 servo motors, a set of handles, a screen, a Schneider electric box, and a foot switch set, with economical and easy-to-use CNC high-level performance.

2.1.2 The efficient algorithm optimizes the bending cycle, reduces the setting time of working steps, and improves the overall efficiency of the bending process, especially in batch processing scenarios.

2.1.3 Strong anti-interference ability, high reliability, and high accuracy. Accommodates 2D and 3D graphics editing.

2.2. Electrical Parts：

2.2.1 The equipment adopts Schneider components imported from France, which are famous for their stability, durability, and long service life.

2.2.2 The machine is equipped with Eston’s original self-adaptive electrical box assembly, which has strong anti-interference ability and stable electrical performance.

2.3. Backgauge：

2.3.1 To ensure the excellent motion accuracy of the X-axis, imported ball screws and linear guides are used to replace the traditional screw rods, which improves the accuracy and consistency of our manufacturing process.

2.3.2 The rear stop uses a synchronous pulley mechanism controlled by a servo motor instead of a stepper motor. This upgrade provides greater control and accuracy to our operations.

2.3.3 The entire back gauge system is tempered at high temperatures to eliminate internal stress, enhance metal plasticity and toughness, and prevent loss of precision caused by frame deformation.

2.4 German OKDO IPM series：

2.4.1 With axial and radial pressure compensation design, it can maintain high volumetric efficiency even at low speed and low viscosity.

2.4.2 Ultra-low noise, using high-strength cast iron and unique internal muffler design, making the noise even lower.

2.4.3 Extremely low flow and pressure pulsation, and can maintain stable flow and pressure output even at low speeds.

3.Main technical parameters

Model	63T/1600	100T/2500	125T/3200	200T/2500	200T/4000
CNC System	TP10S	TP10S	TP10S	TP10S	TP10S
Number Of Control Axes	3 axes (Y1, Y2, X)	3 axes（Y1、Y2、X）	3+1 axes（Y1、Y2、X+V）	3 axes（Y1、Y2、X）	3 axes（Y1、Y2、X）
Nominal Force	630kN	1000kN	1250kN	2000kN	2000kN
Table Length	1600mm	2500mm	3200mm	2500mm	4000mm
Distance Between Columns	1180mm	2040mm	2710mm	1900mm	3100mm
Throat Depth	320mm	400mm	350mm	400mm	400mm
Slider Stroke	170mm	160mm	160mm	200mm	200mm
Opening Height	400mm	450mm	420mm	480mm	460mm
Main Motor Power	5.5KW	7.5KW	7.5KW	15KW	15KW
Control Accuracy	±0.01mm	±0.01mm	±0.01mm	±0.01mm	±0.01mm
Electrical Components	Schneider	Schneider	Schneider	Schneider	Schneider
Ball Screw	TBI	TBI	TBI	TBI	TBI
Back Gauge Guide Rail	HIWIN	HIWIN	HIWIN	HIWIN	HIWIN

4.Working environment and conditions of use

This machine is suitable for any material preparation workshop, and its conditions are:

Ambient temperature: -10～+40℃ (the temperature of the fuel tank shall not be lower than +10℃)
Relative humidity: ≤80% (+25℃)
Power source: 3phase 380V±10% 50Hz（or customized）

This machine has no “three wastes” discharged, and the noise limit meets the requirements of JB9969-1999.

5.Installation, test, acceptance and after service

5.1.Seller should inform the buyer to inspect the machine in our factory after the machine is finished.

5.2.Seller should supply corresponding files and foundation drawings in 7 days after confirming the order.

5.3.If buyer needs the installation, test by seller, then the charges in China will be taken by seller. And charges out of China, such as tickets, and hotels, should be taken by the buyer.