Fiber laser cutting machine is an indispensable efficient and high-precision cutting equipment in modern industry. To ensure its long-term stable operation, improve production efficiency, and reduce the failure rate, regular maintenance, and upkeep are crucial. This guide will detail the key points of care and maintenance of fiber laser cutting machines to help users better manage and maintain the equipment.
Daily maintenance
1. Cleaning work:
The fiber laser cutting machine’s casing, work surface, lens, and reflector should be cleaned before and after daily use. Use a clean soft cloth or dust-free paper to wipe, and avoid using cleaners containing chemical ingredients to avoid damaging the surface of the device.
2. Check the cooling system:
Ensure the cooling water circulation is smooth and the water temperature and level are normal. Clean the cooling water tank and filter regularly to prevent scale and impurities from clogging the pipes.
3. Check the gas system:
Check whether the pressure gauge indication is normal and whether there is air leakage or aging in the trachea. Replace the filter regularly to keep the air path open.
4. Check the cutting head:
Check whether the cutting head is damaged or loose, and ensure that the distance between the cutting head and the workpiece is adjusted accurately.
Regular maintenance
1. Lubrication maintenance:
Regularly lubricate the guide rails, screws, and other moving parts of the fiber laser cutting machine to reduce wear and friction and improve equipment accuracy and life.
2. Fastening screws:
Check whether the screws of each component of the equipment are loose. If they are loose, tighten them in time to prevent equipment failure due to vibration.
3. Electrical system inspection:
Check whether the electrical connections such as power cords and control lines are firm and whether there is any damage. Clean the dust in the electrical cabinet regularly and maintain good ventilation.
4. Optical system calibration:
Regularly calibrate the optical system of the fiber laser cutting machine to ensure the focusing accuracy and cutting quality of the laser beam.
special maintenance
1. Lens replacement:
When the lens is damaged or seriously contaminated, it should be replaced in time. When replacing lenses, make sure the operating environment is clean and dust-free to avoid scratching the lenses.
2. Laser maintenance:
The laser is the core component of the fiber laser cutting machine and requires regular maintenance by professionals. Including cleaning the inside of the laser, checking the laser output power, etc.
3. Software upgrade:
With the development of technology, the control system software of fiber laser cutting machines will be constantly updated. Users should pay attention to software upgrade information and upgrade the device promptly to improve the performance and stability of the device.
The meaning of care and maintenance
Regular maintenance and upkeep of fiber laser cutting machines can not only extend the service life of the equipment, and improve the stability and reliability of the equipment, but also ensure cutting quality and production efficiency. At the same time, through timely maintenance and upkeep, equipment failure rates can be reduced, maintenance costs can be reduced, and greater economic benefits can be created for enterprises.
In short, the care and maintenance of fiber laser cutting machines is a long-term and important task. Users should fully understand the importance of care and maintenance and operate by the requirements of this guide to ensure normal operation and efficient production of the equipment. At the same time, with the development of technology and the upgrading of equipment, users should also pay attention to the application of new technologies and new methods to continuously improve the performance and efficiency of the equipment.
